How to distinguish between a diamond and a zirconia?

How to distinguish between a diamond and a zirconia?

The diamond is the most expensive gem in the world. Many attempts have been made to duplicate it, cubic zirconia, regular zirconia, white sapphire and rhinestones like moissanite. Most experts will recommend that if you are interested in a stone and want to make sure that you are about to buy a real diamond and not a substitute; Take the gem in question and take it with a certified jeweler to evaluate it.

If you want to do it on your own, you can try it; but you must be careful, because more than any other natural stone, a zirconia It may look a lot like a diamond. On the other hand, it is necessary to remember that it is very likely that you cannot determine what type of stone you have. The best thing is that you will know if it is a diamond or not.

Beautiful large diamond engagement wedding ring sitting on multiple loose diamonds scattered all over the bottom

The origin of zirconia is not the same.

First clarify the different origin of both. Zirconium was discovered in the form of zirconium ore oxide (ZrSiO4) by the German chemist Martin Henrich Klaproth. It is a white transition metal and next to titanium. It is found in the origin of zirconium oxide, a fine stone like diamond. On the other hand, diamond is a mineral composed of carbon, known since ancient times. The diamond has different origins: the earth's mantle, volcanic phenomena, sediments, organisms.

In addition, synthetic zirconia, like synthetic stone, distinguishes perfectly from natural diamond. Zirconia or diamond? We are helping you know how to distinguish them.

Do you know how to clean a zirconia?

  1. Mix warm water with a mild dish detergent. Abrasive cleaners can damage cubic zirconia. All you need is some mild dish detergent and some warm water. The precise proportion of detergent and water for the cleaning routine does not have to be exact, but try using one serving of detergent for two serving of water.

2. Rub the cubic zirconia with a soft toothbrush. You can wet the jewels a little to moisten them. You can also simply apply the water mixture with detergent on the toothbrush. Gently rub the zirconia with the brush to remove dirt and debris and obtain a dazzling shine.

  • If you don't have a toothbrush that you don't use, you can also clean the cubic zirconia with a soft makeup brush. For example, an eye shadow brush will work well.

3. Rinse the zirconia completely. It is important that no soap residue remains in the cubic zirconia. After washing it, rinse it under the tap until the water comes out clean.

Comment (2)

  • Fernandezarmando318@gmail..com


    • Diego

      Yes we do, see you soon.

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *